Designed for installation in the control cabinet front
This saves you valuable space on the mounting plate as well as valuable wiring time thanks to our prefabricated compact power modules
LM4i, 4-fach Triacmodul
The 4-channel power module is designed for switching AC voltages to resistive loads, with zero-voltage switching up to 16A per channel. It is designed for installation in the front of the control cabinet. The external heat sink provides the necessary heat dissipation, and a seal guarantees protection class IP54. The triacs are protected by integrated, internally accessible super-fast fuses, eliminating the need for additional assembly and wiring. The mains voltage can be supplied separately to each channel or to multiple channels via optional bridges, enabling individual phase distribution. The outputs are connected via 6.3mm flat connectors. All inputs and outputs are pluggable, and connections are made via pre-assembled cables. An optional internal cover provides the necessary touch protection.
Technical data (excerpt)
Rated power: 16 AACeff, 3680W
Triac: 40A, Typ BTA 41-800BRG
Switching behavior: zero-voltage switch
Rated operating voltage: 400 VACrms
Operating voltage range: 24...480 VACrms
Peak blocking voltage: 800 Vs
Frequency range: 45...65 Hz
Control voltage: 5...30 VDC / 10…15mA, positive and negative switching
Input resistance: 1.0 kΩ
Temperature range: Operating –5... 50 °C
Storage –40... 70°C
Protection class: IP 54
Maße (H x B x T): 99,5 x 250,0 x 98,0 mm
Variants for controlling the controller
Depending on local conditions, the cables can be fed from the left or right.
A maximum of 8 zones can be connected via a DC control line.
